The magnitude of male dignity worried representatives of stronger sex since ancient times.Confirmation of this is an artificial member found, which, according to historians, is at least 28,000 years old.It was discovered during archaeological excavations in Germany - a country considered a pioneer and leader in the field of porn industry.
Today, to change the size of the penis, it is possible in different methods - from the use of special medicines, the use of ointments and creams, performing elongated massage and surgery.However, genital organ nozzles, which can be bought in toys for intimacy and do it with their own hands, become popular.
Is it possible to make a member beak yourself?
The internet is full of requests "how to make an artificial stick with your own hands".The increase in interest is simply explained: the models presented in stores are of high quality and expensive, and those that have a low price do not differ in high quality.Want to try a sex toy, a dilemma is born: is it necessary to pay for goods if there is no confidence in its additional use?
After all, it may happen that the girl does not take advantage of the beak or she will cause her discomfort, irritation or pain (the last is not excluded for men).If you choose a more affordable option, there is a risk of irritation due to a possible allergic reaction to the toy or lesion of the genitals due to broken or beak parts.
It is also possible when you want to try "here and now", but there is no time to wait for a request from the internet, and there is no way to visit the nearest sex.In such situations, the question of how to make a vibrator or a limb nozzle at home is quite relevant.
If you consider the product, it is clear that it is quite difficult to build it, but not impossible.The main thing is to have a desire and a small time supply, as well as buy the necessary materials.It is about the last that the final quality of the resulting object will depend.The advantage of a homemade member is that its shape and size will be limited exclusively by the author's imagination.
The choice of proper material
For nozzles and artificial members produced under industrial conditions, use:
- Cybercro is a material almost similar to a person's actual skin.It is soft, delicate, virtually not distinguishable from living flesh, because when touching the body, it quickly takes its temperature and keeps it throughout the time to stay in the organ.The disadvantage of the material is very susceptible to damage, so it requires careful handling, washing hot water, storage in a special case.
- Polyvinyl chloride is a more popular material for the production of vibrators and sex toys.Its advantages: the ability to quickly assume the form of the human body, strength and combination with lubricants.It is washed by PVC with soft cleaning products: soap, shower gel or intimate hygiene, does not require special storage conditions.The application is possible with any frequency and intensity.
- Silicone is a medical material used for the production of intimate goods in 90% of cases.It is soft, flexible and quite elastic.It is able to quickly take the shape of the body and, after "work", return to its original state.Advantage: Hypoallergenicity that allows the operation of all toys with any intensity.Store silicone nozzles in a dark place, because, under the influence of ultraviolet rays, it is destroyed.The disadvantage - games with it requires processing lubrication and exclusively in water.
- Rubber is a specialized type of material with increased and comfortable thermoplastic properties.Suitable for creating products that need to be supplied and maintained.The softness of the material allows them to make them comfortable for both partners and elasticity - to obtain the necessary parameters (length, thickness, ribs, pimples, etc.).The beaks of a rubber limb do not rub and do not cause allergic reactions.For care, non -aggressive detergents or special cleaning products for intimate toys are used.
- Plastic is a dense material in which special mixtures are added to more softness and elasticity.Used for the manufacture of nozzles of special shapes.
The choice of material is the most important stage of vibrator manufacturing with your own hands, because the final version of the product and your health safety of both partners depend on it.Therefore, it is extremely undesirable to save in this case.
Types of materials
Before you do the phallus at home, you should clarify which of these materials are available to the manufacturer.Some of them are available for free sale in building stores, others by ordering over the internet.
Therefore, for the manufacture of a severity made at home, they are suitable:
- Mass of molding alginate;
- silicone molding mass;
- Flexion polyurethane mass.
Perhaps other options are offered at the store, but before purchasing them, you should find out if the material causes allergic reactions and how safe it is for the body.
Work stages
How to make a vibrator at home?It will be necessary:
- Flexible transparent plastic;
- Adhesive tape (tape);
- selected material;
- Food movie.
A square or rectangle is cut from the plastic sheet - depending on the size of the planned product.The length of the leaf is regulated at ease - the more centimeters man wants to add to himself, the more time it is.The width of the sheet depends on the existing parameters of the penis: in an erect state, it should easily enter and have free space.To make a homemade member to fit in size, it must be:
- Measure -with a centimeter tape;
- Add the right amount of centimeters to the results;
- Cut the desired width.
Error: To curl the plastic sheet around the penis and cut "to eye" - a phallus done alone will be small or very large.
When it is finished with dimensions and cut, the sheet is rotated with a tube, the edge joint is strongly fixed with tape.A circle is cut from plastic, which closes one of the holes and is also well wrapped with tape.The task is to make the tube received completely tight.
The second stage of the process "how to make a vibrator" is spilling.For this, an erect penis is firmly involved in film to exclude mass contact with the body.If the task is to make a soft beak, you need to wrap it carefully, excluding all possible irregularities, because the softness of the inside of the future beak will depend on it.
Then the molding mass is spilled on the prepared tube and the penis is lowered there.The process of solidification, on average, lasts 15 minutes, after which the structure is removed from the penis.Now you can carefully remove the tape and release the product from the plastic structure - a home phallus is ready for use.
If the guy wants to give anatomical shape to the toy, this can be done using a knife and abrasive materials.They are easy to make various edges, ribs, antennas and other "chips" of nozzles.
Risks
Before making a member with your own hands from improvised materials, you need to take serious health risks inherent to home toys for sex:
- Seals, sharp edges or poorly processed, corners, protrusions and other defects in a home toy can cause the injuries of the genitals of both partners;
- The incorrectly calculated size threatens the loss of the nozzle in the intimacy process;A more serious option - can get stuck in a woman's body;
- If the calculations were performed in an incomplete erection state or was lost at the time of mass solidification, there is a risk of not working to remove the nozzle without medical attention;
- Violation of the squeeze by involving a member with a film can cause masses in the urethra, which will cause an inflammatory process or blockage of the urethra;
- Holding a member in a complete erection state for 15 minutes is a difficult task for the solution that men take drugs with phospho surrease inhibitors with serious side effects for the internal organs.
Having evaluated and evaluating all possible risks, they are suitable for independent vibrators and nozzles production responsibly and carefully, and all stages are performed carefully and accurately.
What to do an artificial phallus of
It is easier to make a grocerator directly at home, ie artificial member.Such toys are preferable to women and, if the girl wants, can be left in free possession.For the production of dumplings, they are suitable:
Plaster mixture
It is sold freely in a construction supermarket, pharmacy or children's toy store.Having prepared the dough (the rules for working with the plaster are described in the instructions incorporated in the package), a desired size member is knocked down, it is allowed to dry completely.After being processed with sandpaper to eliminate all bumps.Before the love games, a condom is placed in the phallus.
The use of a plastic plastic mixture is also possible for the production of nozzles: for this, a completely erected member and wrapped in a film is covered with a plaster mixture and harden.However, this toy will be very rigid, and this property causes discomfort, pain, inconvenient.Its second disadvantage is fragility.
Silicone mixture
Another option to fill it is in the form of the anterior vibrator.That is, if the toy has already been purchased (or the package of it accidentally obtained from friends), the silicone mass can be spilled in the form of plastic, previously lubricated with free extraction oil at the end of the work and, after stabbing, glue the halves with super glue.
The glue is able to cause the strongest allergy;Therefore, games with such an artificial member are recommended only with rubber product No. 2.
Wax
This material is available in 90% of cases and anywhere, while there are advantages:
- Take easily the desired shape;
- It has a characteristic aroma;
- In the absence of allergies to the breath of beekeeping, it is allowed to introduce a woman into the body without a condom (it is sufficient to treat it with grease).
The wax candle warms, receives the necessary dimensions of length and width, if desired, additional stimulant edges, spikes, ribs, etc.
Plasticine
This product for children's creativity can be used in the same way as wax, but it is worth considering that it is more plastic and therefore can easily lose its shape in the midst of sexual contact.A simple pencil is able to make a more stable toy, placed inside a cloudy artificial member or preliminary phallus freezing.
Improvised means
You can make a beak for a penis, but this process is not fast.If the desire of experiments came up suddenly and there are no special toys in hand, you can use improvised means.How can you replace a member?
- Vegetables and fruits.In almost all refrigerators, there are nature gifts that have the shape of a phallic symbol.An ideal and affordable option - cucumbers and bananas, which refrigeratedly will bring your enthusiasts to intimate games.
- Cell phones.We are talking about small models that can be placed in vibration.
- Electric Razor.A cutting block is previously removed from it.
The alternative will serve as a comb with a long, wide pen, curl curls and some things in a phallic way without sharp corners and splashes.The main condition for its application: Rinse in the water and put a condom in them.
Games in bed with nozzles, artificial members and lubricants are called to do diversity and acute in the couple's intimate life.However, before replacing a member with an artificial copy, it is worth coordinating this problem with a lover;Otherwise, a romantic night may end unfortunately: a serious fight or a painful break.